The LJTick-Resistance (LJTRx) makes it easy for LabJack devices to measure resistive sensors. This tick gives users a regulated 2.5V signal that can be used as a excitation voltage and a known resistance value in series with a sensor input line. This gives users the ability to calculate the resistance of their connected sensor. Uses precision 1k, 10k, 100k, or 1M resistors in a resistor divider setup.
R 570,00
Kvaser Leaf Light Rugged is a one channel USB interface for CAN. While the internal components are the same as the popular Leaf Light HS, the rugged IP65-rated housing assures reliable protection against water and dust in harsh environments.
R 7 050,00
The X-310™ is a full-featured, web-enabled, Ethernet I/O module with four, independent 1-Amp relays, four digital inputs, support for up to four temperature or humidity sensors, and the ability to control up to 16 remote relays. It has non-volatile memory for logging (temperature, digital inputs, relays, etc.), a real-time clock with support for NTP (time server) synchronization and an advanced full-calendar scheduler which can be used to turn on/off relays at preset times. Its web-based user interface makes it easy to set-up and use.
R 4 340,90
Outputs a voltage from -10V to +10V. The PhidgetAnalog 4-Output Produces a voltage over -10V to +10V. This voltage will be asserted up to +-20mA. An error will be reported when this current is exceeded, and the voltage the customer is getting is no longer accurate. The voltage is produced with 12 bit resolution (4.8mV). The board is not isolated and all 4 channels share a common ground. All the power is supplied by the USB bus.
R 1 665,00
17" industrial monitor with Projected Capacitive Multi touch,250Nits,1280x1024,VGA,DVI input, Black Aluminum Front bezel,IP65/NEMA 4X front water proof, Combo touch interface: RS-232 and USB.
R 13 910,00
The 3551 is an economical combination electrode ideal for general industrial processes. It is well suited for testing pool water, sea water or underground water. It can also be used at high temperature in strong acid or base environments.
R 2 100,00
S18 EZ-LIGHT - 18 mm - IP67, Single Color: Red, 10-30 Vdc PNP Input, 4 Wire 2m Cable
R 300,00
The 2-Finger Adaptive Gripper was designed to fit seamlessly with Universal Robots and will integrate easily with all UR models through its: Mechanical coupling, USB connectivity, Fully integrated control software. The 2-Finger Adaptive Gripper is also compatible with all major industrial robot manufacturers.
R 82 000,00
Body material - polycarbonate PC. Housing dimensions - 72x80h56 mm. Black base, yellow cover.
R 110,00
Body material - polycarbonate PC. Housing dimensions - 120x80h56 mm. Black base, Gray cover.
R 155,00
Body material - polycarbonate PC. Housing dimensions - 153x80h56 mm. Black base, Gray cover.
R 180,00
The vibration sensor uses a piezoelectric element to measure vibration on a surface and connects to an analog input.
R 230,00
You can measure magnetic fields or sense the proximity of a magnet with this hall-effect analog sensor.
R 230,00
Apply for fixing the conduits. With screw on the bottom to fix on wall or ceiling. Applicable for joint together for multiple conduits. The cap design can secure the fixed of conduits.
R 1,90
Apply for fixing the conduits. With screw on the bottom to fix on wall or ceiling. Applicable for joint together for multiple conduits. The cap design can secure the fixed of conduits.
R 1,40
Applicable to electrical, machinery, and building harness wiring. Flexibility for installation while providing protection to cables. Fluid resistance. Sold per meter.
R 9,40
Applicable to electrical, machinery, and building harness wiring. Flexibility for installation while providing protection to cables. Fluid resistance. Sold per meter.
R 18,30
Push-in lock design makes connection and disconnection quick and energy-saving. Simple dismounting the conduit from adaptor by pressing the snap-in sleeve. Smallest outer dimensions to be used under confined conditions. For machine, train, elevator...etc., where the maintenance need to be quick and perfectly done
R 6,70
Part No. PG-21 Cable Range 13~18 mm
R 10,40
Push-in lock design makes connection and disconnection quick and energy-saving. Simple dismounting the conduit from adaptor by pressing the snap-in sleeve. Smallest outer dimensions to be used under confined conditions. For machine, train, elevator...etc., where the maintenance need to be quick and perfectly done
R 8,80
The knuckle uses a double socket configuration to clamp the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing capability
R 696,60
Apply for fixing the conduits. With screw on the bottom to fix on wall or ceiling. Applicable for joint together for multiple conduits. Easy to clip and unfasten.
R 1,30
Part No. PG-13.5 Cable Range 6~12 mm
R 7,10
The ball base has a hole pattern to fit most standard T-slot aluminum extrusions. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires.
R 372,50
The ball base has 2 holes for ease of mounting. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove on the side of the base for cables, hose, and wires.
R 226,20
The knuckle uses a double socket configuration to clamp to the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability.
R 412,50