The Kvaser Leaf Light v2 represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network With its USB 2.0 compliant connector and 9-pin D-SUB connector, the Leaf Light v2's sleek, ergonomically designed housing is both robust enough for everyday use and small and flexible enough to be used in space-constrained applications. Now with galvanic isolation as standard.
Outputs a voltage from -10V to +10V. The PhidgetAnalog 4-Output Produces a voltage over -10V to +10V. This voltage will be asserted up to +-20mA. An error will be reported when this current is exceeded, and the voltage the customer is getting is no longer accurate. The voltage is produced with 12 bit resolution (4.8mV). The board is not isolated and all 4 channels share a common ground. All the power is supplied by the USB bus.
Kvaser BlackBird SemiPro is a high performance wireless communication link to the CAN bus utilizing WLAN technology, which offers increased mobility and extended range of coverage for CAN bus networks. This model features a two channel WLAN-to-bus interface for High-Speed CAN (ISO 11898-2) and handles a bit rate from 5 kbits/s up to 1 Mbits/s.
The Kvaser Leaf Light supports full speed USB interface for CAN with high performance at a low cost. Loss free transmission and reception of standard and extended CAN messages on the CAN bus is transmitted with a time stamp precision of 100 microseconds. (EOL 2014-09-30) No Housing or cables.
The Kvaser Leaf Light supports full speed USB interface for CAN with high performance at a low cost. Loss free transmission and reception of standard and extended CAN messages on the CAN bus is transmitted with a time stamp precision of 100 microseconds.
Kvaser Leaf Light Rugged is a one channel USB interface for CAN. While the internal components are the same as the popular Leaf Light HS, the rugged IP65-rated housing assures reliable protection against water and dust in harsh environments.
Kvaser Leaf Professional LIN is a one channel, high performance, USB interface for LIN (LIN 1.3 and 2.x). A versatile and powerful interface that offers easy connection between your PC and LIN network, it includes Kvaser's patented MagiSync feature for synchronized time-stamping and Galvanic Isolation for protection against voltage spikes.
Kvaser Leaf SemiPro is a one channel USB interface for CAN that is available in two versions; low speed and high speed. It offers the possibility to easily connect your PC and CANbus network. Includes Kvaser's patented MagiSync feature for synchronized time-stamping, and Galvanic Isolation for protection against voltage spikes.
The LJTick-Resistance (LJTRx) makes it easy for LabJack devices to measure resistive sensors. This tick gives users a regulated 2.5V signal that can be used as a excitation voltage and a known resistance value in series with a sensor input line. This gives users the ability to calculate the resistance of their connected sensor. Uses precision 1k, 10k, 100k, or 1M resistors in a resistor divider setup.